The Ubiquiti UniFi PoE Smart Chime (UACC-Chime-PoE) is a network-powered indoor chime for UniFi Protect doorbells and UniFi Access door entries. Because it takes both data and power from a single Ethernet run, it can be sited wherever it will actually be heard — a hallway, a workshop, a back office or an upstairs landing — rather than being tied to existing doorbell wiring. The built-in speaker and buzzer give an audible alert, and the R/G/B/W LEDs give a visual one for noisier rooms.
Key features
- Audible doorbell and door-entry notifications via speaker and buzzer
- R/G/B/W status LEDs for visual notification
- Single 10/100 MbE port carrying data and power, so no separate mains outlet is needed at the chime
- Low 3W maximum draw
- ESD protection of ±8 kV air and ±4 kV contact
- NDAA compliant; CE, FCC and IC certified
Specifications
| Model | UACC-Chime-PoE |
| Dimensions (device) | ⌀62 x 54 mm (⌀2.5 x 2.1″) |
| Dimensions (in-wall mount) | ⌀89 x 63.1 mm (⌀3.5 x 2.5″) |
| Dimensions (on-wall mount) | ⌀62 x 20.2 mm (⌀2.5 x 0.8″) |
| Weight (device) | 158 g (5.6 oz) |
| Weight (in-wall mount) | 91 g (3.2 oz) |
| Weight (on-wall mount) | 28 g (1 oz) |
| Enclosure material | Polycarbonate, aluminium alloy |
| Mount material | Polycarbonate, zinc alloy |
| Networking interface | 10/100 MbE port |
| Speaker | Yes |
| Buzzer | Yes |
| Power method | PoE |
| Supported voltage range | 44-57V DC |
| Max. power consumption | 3W |
| ESD protection | Air: ±8 kV, contact: ±4 kV |
| LEDs | R/G/B/W |
| Buttons | (1) factory reset |
| Operating temperature | 0 to 40°C (32 to 104°F) |
| Operating humidity | 10 to 90% non-condensing |
| Certifications | CE, FCC, IC |
| NDAA compliant | Yes |
The UniFi PoE Smart Chime is adopted and configured from your UniFi console like any other UniFi device.
No products in the cart.
Reviews
There are no reviews yet.