Ubiquiti UACC-OM-SM-10G-D-2 Fiber Module

Ubiquiti UACC-OM-SM-10G-D-2 | 10Gbps Single-Mode Fiber Module (Twin Pack)

10G fibre in a pair plug in and link up

The UACC-OM-SM-10G-D-2 is a twin pack of 10Gbps single-mode SFP+ transceivers from Ubiquiti, built to connect two points over fibre at full 10G speed across distances up to 10 km. You get two matched modules one for each end of the link so a single purchase gives you a complete connection. Drop them into any SFP+ port on a UniFi switch, EdgeSwitch, or compatible third-party device, and the link is live.

Whether you’re connecting a switch to a core, bridging two buildings, or running a long-distance uplink in an ISP or campus network, these modules deliver the speed and reach that copper can’t.

10Gbps throughput, up to 10 km

Each module runs at 10Gbps over single-mode fibre at a 1310nm wavelength, with a usable range from 0.5 km to 10 km. That covers everything from a cross-campus backbone to a building-to-building link across a business park distances where copper tops out at 100 metres and you need fibre to close the gap.

Duplex LC connector full bidirectional data

The modules use a standard duplex LC connector for simultaneous two-way data transfer over a pair of single-mode fibres. It’s the most common fibre connector in enterprise and ISP networks, so it mates with the vast majority of existing patch panels and fibre patch leads.

Drop-in compatible

Designed for the Ubiquiti ecosystem UniFi switches, EdgeSwitches, and any device with an SFP+ slot and tested to work with a wide range of third-party networking hardware. If the port is SFP+ and the device supports 10G, these modules slot right in.

Hot-swappable, zero downtime

Both modules are hot-swappable: push one into a live switch and it’s recognised without a reboot or a service interruption. Swap, upgrade, or troubleshoot without taking the link or anything behind it offline.

Low power, low cost per link

The transceivers are power-efficient by design, drawing minimal wattage while delivering full 10G performance. Sold as a pair, the twin pack also simplifies ordering you are buying a complete link, not half of one.

Technical specifications

Ideal for

• Switch-to-switch uplinks — 10G backbone between access and core layers
• Building-to-building links — bridging two sites across a campus or business park
• ISP and telco infrastructure — long-range fibre backhaul and distribution
• Data centres — high-speed interconnects between switches, routers, and storage
• Campus and institutional networks — universities, hospitals, government sites needing scalable fibre

Complete the link

Two modules, one purchase, one 10G fibre connection ready to drop into your SFP+ ports. Add the twin pack to your order, and if you need help confirming compatibility with your switch or planning a fibre run, get in touch and we’ll make sure it all fits.