4-Directional Multisensor PoE Security Camera, 2560 X 1920 @ 25fps, IR Night Vision, IP67 & IK10, H.265+

4-Directional Multisensor PoE Security Camera

2560 × 1920 @ 25fps · IR night vision · IP67 & IK10 · H.265+

One camera. Four directions. No blind corner.

Four cameras on one pole means four cable runs, four switch ports, four mounts and four things to align. This does the same job with one of each four independently adjustable sensor heads on a single housing, covering the full sweep around a corner, a forecourt, an intersection or a yard.

Point each head where it’s needed and the gaps between them disappear.

Where it earns its place

• Corners and junctions — a building corner normally needs two cameras aimed in opposite directions. One unit covers both faces and the approach between them.
• Car parks and yards — panoramic coverage from a single mast rather than a ring of poles.
• Warehouse and loading areas — watch dock doors, the yard and the approach road at once.
• Driveways and large sections — full coverage from one mounting point on a residential property.
• Schools, forecourts and public spaces — wide-area monitoring without a camera every ten metres.

2560 × 1920 at 25fps

Roughly 5MP per sensor at a smooth 25 frames per second and 25fps is the right number for New Zealand, since it aligns with our 50Hz mains and avoids the flicker banding you can get from mismatched frame rates under artificial light.

One cable does everything

Power and data over a single Ethernet run. For a four-view camera that’s the real saving you are pulling one cable where a conventional install needs four, and terminating one connection at the switch instead of four.

H.265+ compression

Necessary rather than optional on a camera like this. Four simultaneous streams is a lot of data, and H.265+ is what keeps your recording days at a sensible number and your network from carrying more than it should.

IR night vision to 100 ft

Infrared illumination across all four views, delivering usable footage in complete darkness out to roughly 100 feet.

Built for the outside

IP67 weatherproofing and an IK10 vandal-resistant housing rated for sustained weather exposure and for the physical impact that matters when a camera is mounted somewhere reachable. Suitable for coastal, rural and industrial sites where a lesser housing wouldn’t last.

Works with what you have

ONVIF-compliant, so it integrates with most NVRs and third-party systems rather than locking you into one ecosystem.

Specifications