The Ubiquiti UniFi U7 Pro XGS is a ceiling-mounted 8-stream WiFi 7 access point with a dedicated spectral scanning radio and 10/5/2.5/1 GbE support. It sits above the U7 Pro XG in the range: two more spatial streams, higher 5 GHz gain and transmit power, and a separate scanning radio that monitors the RF environment continuously rather than interrupting client traffic to do a survey. That combination suits dense, interference-prone sites — multi-tenant offices, apartment buildings, schools, clinics and conference spaces — where understanding what the neighbours are doing to your spectrum matters as much as raw throughput.
Key features
- Tri-band WiFi 7 with 8 spatial streams
- Dedicated spectral scanning radio, so RF analysis runs without taking the serving radios off air
- Single 10 GbE RJ45 port, negotiating 10/5/2.5/1 GbE, giving the access point plenty of wired headroom
- 6 GHz band for clean spectrum on capable clients; 6 GHz operation is available only in countries where Ubiquiti supports it
- Higher 5 GHz output than the XG at 29 dBm, with 6 dBi gain on both 5 GHz and 6 GHz
- Power method is PoE++, drawing up to 29W — it needs an 802.3bt switch port or injector, not PoE+
- Slim ceiling profile at 32.5 mm deep; ceiling or wall mounting, with Ubiquiti’s Lite Mount listed as included
- UV-stabilised polycarbonate and aluminium alloy enclosure with a stainless and galvanised steel mount
- NDAA compliant; adopted and managed in the UniFi Network application
Specifications
| Model | U7-Pro-XGS |
| WiFi standard | WiFi 7 |
| Spatial streams | 8 |
| Networking interface | (1) 10 GbE RJ45 port |
| Antenna gain | 6 GHz: 6 dBi; 5 GHz: 6 dBi; 2.4 GHz: 4 dBi |
| Max. TX power | 6 GHz: 24 dBm; 5 GHz: 29 dBm; 2.4 GHz: 23 dBm |
| Power method | PoE++ |
| Max. power consumption | 29W |
| Supported voltage range | 42.5–57V DC |
| Dimensions | ⌀215 x 32.5 mm (⌀8.5 x 1.3″) |
| Weight | 800 g (1.8 lb) |
| Mounting | Ceiling, Wall (Lite Mount Included) |
| Enclosure material | UV-stabilized polycarbonate, aluminum alloy |
| Mount material | Stainless steel (SUS304), galvanized steel (SGCC) |
| Operating temperature | -30 to 40° C (-22 to 104° F) |
| Operating humidity | 5 to 95% noncondensing |
| Certifications | CE, FCC, IC |
| NDAA compliant | Yes |
If you are specifying the UniFi U7 Pro XGS, confirm the switch port can deliver 802.3bt PoE++ — a PoE+ port will not run it at full output.






























Reviews
There are no reviews yet.