The Ubiquiti UniFi U7 Pro Wall is a wall-mounted WiFi 7 access point with 6 spatial streams and 6 GHz support, which Ubiquiti positions as “tailored for home builders with seamless installation options”. The flat, rectangular housing is designed to sit on a wall rather than a ceiling, which makes it a practical fit for homes, apartments, hotel rooms, serviced offices and retrofits where there is no ceiling cavity to run a cable through but there is a data point at wall height. Despite the compact form it carries the same tri-band WiFi 7 radio set as the rest of the U7 Pro line.

Key features

Tri-band WiFi 7 with 6 spatial streams; 6 GHz operation is available only in countries where Ubiquiti supports it
Rated by Ubiquiti for 300+ concurrent clients
1/2.5 GbE RJ45 port providing a 2.5 GbE uplink, so the wired side is not limited to 1 GbE
Power method is PoE+, drawing up to 22W from an 802.3at switch port or injector
Wall mounting with the mount listed as included
Wide -30 to 60° C operating range, useful in unconditioned spaces such as garages and stairwells
Polycarbonate and aluminium enclosure with an aluminium mount
NDAA compliant; adopted and managed in the UniFi Network application

Specifications

Model	U7-Pro-Wall
WiFi standard	WiFi 7
Spatial streams	6
Networking interface	(1) 1/2.5 GbE RJ45 port
Uplink	2.5 GbE
Max. client count	300+
Antenna gain	6 GHz: 6 dBi; 5 GHz: 5 dBi; 2.4 GHz: 4 dBi
Max. TX power	6 GHz: 23 dBm; 5 GHz: 26 dBm; 2.4 GHz: 22 dBm
Power method	PoE+
Max. power consumption	22W
Supported voltage range	44–57V DC
Dimensions	150 x 103 x 36 mm (5.9 x 4.1 x 1.4″)
Weight	580 g (1.3 lb)
Mounting	Wall (Mount Included)
Enclosure material	Polycarbonate, aluminum
Mount material	Aluminum
Operating temperature	-30 to 60° C (-22 to 140° F)
Operating humidity	5 to 95% noncondensing
Certifications	CE, FCC, IC
NDAA compliant	Yes