M5StickC PLUS with Watch Accessories

Description

M5StickC PLUS is powered by ESP32-PICO-D4 with Wi-Fi and is an upgrade of the original M5StickC with a bigger screen .It is a portable, easy-to-use, open source, IoT development board. This tiny device will enable you to realize your ideas, enrich your creativity, and speed up your IoT prototyping. Developing with M5StickC PLUS takes away a lot of the pains from the development process. M5StickC Plus is one of the core devices in M5Stacks product series. The compact body is integrated with rich hardware resources, such as infrared, RTC, Microphone, LED, IMU, Buttons, PMU,etc. Improvements from the regular StickC are a buzzer, bigger screen (1.14-inch, 135 * 240 resolution LCD Screen) and more stable hardware design. This revision increases the display area by 18.7%, and the battery capacity from 95mAh to 120mAh. It also supports the HAT and Unit family of products. Power switch operation:

• Power on :Press power button for 2 seconds
• Power off :Press power button for 6 seconds

Product Features

• ESP32-based support Wi-Fi
• Built-in 6-Axis IMU
• Red LED
• IR transmitter
• Microphone
• RTC
• Buttons, LCD(1.14 inch)
• Built-in Lithium Polymer Battery
• Extendable Socket
• Built-in Passive Buzzer
• Wearable & Wall mounted
• Compatible with multi-platform development:
  • UIFlow
  • MicroPython
  • Arduino
  • .NET nanoFramework

Include

• 1x M5StickC Plus

Applications

• Internet of things terminal controller
• Wearable devices
• Stem education product
• DIY creation

Specification

USB Driver

class=”warn”>Connect the device to the PC, open the device manager to install FTDI driver for the device. Take the win10 environment as an example, download the driver file that matches the operating system, unzip it, and install it through the device manager. (Note: In some system environments, the driver needs to be installed twice for the driver to take effect. The unrecognized device name is usually M5Stack or USB Serial. Windows recommends using the driver file to install directly in the device manager (custom Update), the executable file installation method may not work properly). Click here to download FTDI driver

EasyLoader

Download Windows Version Easyloader Download MacOS Version Easyloader  class=”warn”>Description:
Accelerometer, microphone, LED, IR, RTC and other hardware tests. Press A or B to switch test items. Notice:

• Baud rate supported by M5StickC Plus: 1200 ~115200, 250K, 500K, 750K, 1500K
• G36/G25 share the same port, when one of the pins is used, the other pin should be set as a floating input
• For example, to use the G36 pin as the ADC input, Configuration the G25 pin as FLOATING
• The input range of VBUS_VIN and VBUS_USB is limited to 4.8-5.5V, and the internal battery will be charged through AXP192 power management when VBUS is powered.

setup()
{
   M5.begin();
   pinMode(36, INPUT);
   gpio_pulldown_dis(GPIO_NUM_25);
   gpio_pullup_dis(GPIO_NUM_25);
}

PinMap

RED LED & IR Transmitter & BUTTON A & BUTTON B

TFT LCD Driver IC:ST7789v2 Resolution:135 * 240

GROVE PORT

MIC (SPM1423)

6-Axis posture sensor (MPU6886) & power management IC (AXP192)

AXP192

Related Link

• datasheet
  • ESP32-PICO
  • ST7789v2
  • BM8563
  • MPU6886
  • AXP192 datasheet
  • AXP192 register
  • SPM1423
• API
  • Arduino API
• Arduino Library
  • M5StickC_PLUS Library

Learn

Santa Tracker using M5StickC Plus for an M5Stack Christmas

Who isn’t waiting for Santa? Well, using an M5StickC Plus, you can track where is Santa is while he is delivering gifts.

Example

Arduino

• M5StickC Plus factory test code

Version Change